Are your tiles and grout heavily embedded in the dirt?
The tile is durable and beautiful and generally easy to clean.
But, cleaning grout? It is light-colored and has a porous composition. Therefore grouts are prone to staining.
Also, dirty grout makes your bathroom and kitchen tile look unsightly, and cleaning them becomes a time-consuming task. Grimy tile and grout may not seem like a big deal, but they can impact how the entire room looks.
Tile and grout cleaning services may take a bit of elbow grease. But once you learn the hack to clean grout, your bathroom and kitchen place will sparkle once again.
So, don’t let grubby grout get you down. Roll up your sleeves and try these Tile Grout cleaning tips to bring back that sparkle again-
- Cleaning Tile Grout With Vinegar and Water: Prepare a solution of warm water and vinegar in a spray bottle. Add a squirt of dishwashing soap. Mix it well and spray it on a tile. Let it sit for at most 20 minutes. Start scrubbing the grout vigorously using a nylon bristle brush. Wash it off with cool and clean water.
- Cleaning With Vinegar, Baking Soda, and Water: If the solution of water and vinegar didn’t work on rigid stains of grout, add baking soda. Add 1/4th cup of baking soda into a bowl and pour cool water sparingly. Mix it well until a thick paste is formed. Take an old toothbrush and apply the paste.
Now spray vinegar and water solution onto the paste. It will start foaming up. Scrub it well with a nylon brush and rinse it off with clean and cold water. - Cleaning With Bleach: Mix three tablespoons of powdered bleach and warm water in a bucket. It is suggested to wear gloves and keep your hands well protected. Do not touch your eyes or face. Make a thick paste and fill the grout lines with this solution. Let it sit for at most 15 minutes.
- Cleaning With Steam Cleaner: When all your cleaning methods have failed, use a home steam cleaner for tile grout cleaning. Steam cleaners will bring water to a boil in a canister and direct steam through a hose to the tile surface. Heat the water for about ten minutes and start cleaning the tile and grout thoroughly. Replenish the water right after 60 minutes. Scrub off the grout with nylon brushes to bring the sparkle back.
How to clean grout on floor tile
Before you start cleaning the grout off floor tile, understand the different types of grout-
Sanded Grout
- This is a standard grouting material with aggregate sand added. It is commonly used for high-trafficked floors.
Unsanded Grout
- It contains no sand and is usually used for more narrow types of jobs. This is often the best choice for polished, smooth, and marble tiles.
Epoxy Grout
- Epoxy Grout is founded majorly in water-exposed areas. It is better suited to harsher chemical products. It offers greater bond strength and chemical resistance than cement-based grouts.
The Final Words
Cleaning tiles and grout is a tough and energy-consuming task. It’s not an option but a priority. Tile and grout cleaning requires regular maintenance to keep up any semblance of cleanliness. By using the above-mentioned common household tricks, some elbow grease, and time-tested tips, you will make your kitchen and bathroom shine again, no matter how soiled it is.
Look for professional tile and grout cleaning for the best results.
Comments
Post a Comment